Rive D25 Spray Bar.

This topic has 8 replies, 5 voices, and was last updated 16 years, 1 month ago by ukrottie.

Viewing 8 reply threads

Author

Posts
- 08/03/2010 at 9:32 pm #37707
  TF_Mike_Globe
  Have just purchased a D25 Rive and thought my ‘PUPPS’ spray bar would fit the legs but it doesn’t.
  
  I don’t want to use it to support my pole, I just use it to attatch my keepnets, feeder arm and other bit to.
  
  Do any other spray bars fit?
- 08/03/2010 at 9:52 pm #97658
  TF_Nigel.
  Just fit them to your front legs then!
  You cant fit them to the bar itself anyway, it has a rubber cover along it.
- 08/03/2010 at 10:02 pm #97661
  TF_Mike_Globe
  Sorry mate, should have been more clear, wanting to use all my existing bits and quite like the spray bar setup.
  
  Was sure I’d read somewhere that the fox bar fitted?
- 08/03/2010 at 10:06 pm #97662
  TF_Mike_Globe
  Think I’ve cracked it, looks like the Preston ‘tool bar’ will fit.
- 08/03/2010 at 10:10 pm #97663
  TF_Gillbo
  Mike you could get a fabricator to alter your PUPS spray bar. I have seen and heard of lads adapting the old penrose and octoplus ones to fit D25 round leg and even D36 leg. The preston bar is good for keepnets though just a little pricey for what it is.
- 08/03/2010 at 10:11 pm #97664
  TF_piperpilot
  The tool bar fits perfectly with the 25mm green inserts.
- 08/03/2010 at 10:15 pm #97665
  TF_Mike_Globe
  Cheers lads, I thought you might know ron 🙂
- 08/03/2010 at 10:44 pm #97668
  TF_piperpilot
  I was toying with the idea of the new Fox MSB bump bar which I saw at the ‘Big One’ show a couple of weeks back. It looked a very smart design with long round spray bar slightly behind the bump bar which enabled a keepnet to be fitted at each end and also a bracket for a pole sock. The latest Fox fittings have an insert for 25mm legs but at the moment I’m waiting for an answer if it’s wide enough to fit a Rive footplate. Personally I think it will but don’t fancy splashing out the ‘Filthy Luca’ until I’ve been assured it will fit,
- 09/03/2010 at 10:09 am #97691
  ukrottie
  hi piperpilot maybe you can help me. I brought a fox msb euro at the big one and saw the spary bar your talking about. I brought a spary bar kit on sat and it was the wrong one it was for the square 19mm legs. Ive googled all over for a 25mm round one but cant seem to track one down would you know where i could get hold of one. many thanks in advance derek.
Author

Posts