banded pellet hook lengths.

Home › Forums › Fishing › Coarse And Match Fishing › banded pellet hook lengths.

  • This topic has 3 replies, 4 voices, and was last updated 16 years ago by yorkiboy.
Viewing 3 reply threads
  • Author
    Posts
    • 10/04/2010 at 10:16 am #38608

      TF_youngy

        Gents,

        I’m having problems getting my knotless knot/banded pellet hooklengths exactly the same size. As you can with a periotti and sensas loop tyer.

        I usually do the hook end 1st then wrap the end around the pin and then use the loop tryer. But im not getting exact same lengths.

        Any tips or videos to show how to do it?

        cheers

      • 10/04/2010 at 1:48 pm #101752

        TF_CasterBlaster
        Participant

          Hi Youngy,
          I used to have the same problem, im my case I had to change the way I tied the loop, I used to use a figuire of 8 knot but always had problems with the length, I now use a double turn loop with a seymo loop tyer and have no problems.

          Hope that helps

        • 10/04/2010 at 5:41 pm #101761

          Sammydimple

            Me too; works every time~clap

          • 10/04/2010 at 11:00 pm #101792

            yorkiboy

              Are you using it for Method feeding If so I don’t think that it matters if it is not quite the same length. The ones I make are not always the same length may be a few mms out. I use a Sensas loop tyer to make figure of eight knots as they are much stronger than double over hand knots.
              You could buy a Preston Innovations hook box as there are pegs that are supposed to help tie hooklengths the same length.

          • Author
            Posts
          Viewing 3 reply threads

          You must be logged in to reply to this topic.