Browning pulls kits

This topic has 3 replies, 3 voices, and was last updated 15 years, 2 months ago by TF_wildinguk.

Viewing 3 reply threads

Author

Posts
- 22/03/2011 at 4:51 pm #45429
  kookie
  I await to pick up z7.5 with pulla kits. I wish to have them all the same size with various elastics. What size internal bush do I need and how much do you need to cut back. I wish to order the bushes etc from fosters as they will offset some of the cost The heaviest elastc will probably be black hydHro or equvilant
- 22/03/2011 at 8:17 pm #135843
  TF_paulD
  I know that some on here do, but I dont cut my PMK or pullka kits back. Just put a bush in. Theyre stiff enough for me, not too long and the bush that fits is big enough for all except really big hollows. Will take black hydro easy.
  The tip is 4.5mm id. if you can find them the sensas and colmic 3.6 size internals fit perfectly. I bought some 3.6 Garbos but they are slightly too big unless you take about 4″ of the tip. One of the Mavers is close but need glueing in.
  Ive only got 2 pullas at the mo but am going to get some more. It took me a few fish get used to them but love them now and are better than bungs IMO.
- 22/03/2011 at 10:13 pm #135857
  kookie
  Good news cheers Paul. Anyone on a suitable alternative to hydro re cost and the equivalent for black and white hydro.Advice re elaticating configurations for 8 tops = Fish commercials most of the time.
- 23/03/2011 at 7:07 am #135871
  TF_wildinguk
  could try doubled elastics, work fine for me…double 6 is about grey hydro, double 8 about black, double 10 i think is about purple from memory. They’re soft on the strike, but ramp up a bit quicker than hydro but thankfully don’t stretch to quite the same extent. Lots cheaper too. Also, most important for me, it’s alot lighter than hollo or hydro. I use double 8 alot with a pull bung, and there’s nothing I haven’t landed yet. Give it a go.
Author

Posts