Feeders for deep water

Home Forums Fishing Coarse And Match Fishing Feeders for deep water

Viewing 10 reply threads
  • Author
    Posts
    • #59640

      TF_vicci5

        At what depth should I not consider a metal cage feeder? Have been using the end loaded ones to achieve distance but the depths are over 20ft. I am packing the feed in nice and tight but not totally sure it’s getting to the bottom fully loaded. Should i be switching to a regular plastic feeder for this kind of depth? If so are there any that are designed for distance? I have used nisa flyers in the past which I found quite good but not as good as the metal cage ones. Also anyone know how many feet per second a 1oz bomb falls through water???
        Thanks.

      • #176790

        TF_gazer

          Think the fall is approx 1ft per second

        • #176793

          TF_Matchcarp

            I reckon 1ft/second too.
            Wrap your feeder in speed mesh then you know the bait is intact until it reaches the bottom, can’t imagine it’s hectic fishing in that depth? 😮

          • #176794

            TF_daveyboy

              Vicci , have you thought about using the plastic worm feeders without any holes in them, you should be able to change the lead weight from the nisa flyers onto the worm feeders.

            • #176771

              TF_vicci5

                i actually have some of those worm feeders but have never used them.I am a bit unsure about using regular plastic feeders since i read an article in one of the mags about how different feeders react under water. they were basically saying that they were crap and didnt empty out properly – even after a couple of twitches.
                dont get me wrong i catch plenty of fish using the metal cage feeders but was curious to hear other peoples views. Speed mesh? never heard of it, can you get it in tackle shops ?

              • #176774

                TF_rocketFeeder

                  For what it’s worth I personally use a cage feeder in all depths. If the groundbait mix is right you can use one no problem. I tend to use a tube if feeding dead mag/worm or if I want a really light mix to reach the bottom. Not saying I’m right but nowt wrong with a cage in deep water IMO.

                • #176777

                  TF_Matchcarp

                    You know, PVA mesh, wrap your metal feeder in it, once it’s on the bottom it will dissolve and allow the feeder to disperse the bait on the bottom naturally. I think that’s what I would do in your situation to give me confidence the feed stays in the feeder until it’s on the deck 🙂

                  • #176779

                    TF_millie

                      I don’t ever use a cage feeder just use a plastic one with no holes in it that way you get the feeder to raise up off the bottom quicker so cuts out chances of it getting snagged up

                    • #176741

                      TF_Kennyb

                        Hi All
                        I recently fished a series of “tip” matches with two members of the England Feeder team and was fascinated to hear their tales of how they won last years World Championships” . One of the key elements of their success was finding feeding skimmers. This they did this successfully by finding that they fed in water the depths of a ten count. However a ten second count to me might be a 13 second count to others depending on how fast you count. So they informed me that they were all asked to count to 10 and were timed on a stop watch some took 9 seconds some took 13. So in order to ensure some consistency they firstly all decided to use a Guru square 1oz bomb. They then chose a swim with a ten second drop ,then another member of the team cast a slider over the same mark till they just touched bottom. They then measured the exact depth and from those measurements they could accurately state the distance the bomb fell through the water. The rest they say is history. Some of the team counted a 13 second count others counted a 9 depending on how fast or slow they counted to 10.
                        Now that in my book sets these anglers apart from mere angling mortals like ourselves. Would you and a couple of mates got to the same trouble ?
                        Keep posting
                        Keep smiling
                        Kennyb

                      • #176737

                        TF_vicci5

                          So what was the depth on the slider?

                        • #176717

                          TF_waveydavey21

                            Have you tried the Tony Burke range of feeders? Designed for fishing Irish waters, lead at one end and no holes in the feeder. Widely used and respected everywhere!

                        Viewing 10 reply threads

                        You must be logged in to reply to this topic.