DAIWA MULTI BORE KITS

Home Forums Fishing Coarse And Match Fishing DAIWA MULTI BORE KITS

  • This topic has 7 replies, 6 voices, and was last updated 16 years ago by TF_samstone.
Viewing 7 reply threads
  • Author
    Posts
    • #38079

      Rankoutsider

        Good moringing everybody

        Just a couple of quick questions

        1. Do the Daiwa Multi Bore top 3 kits fit the Daiwa Airity.

        2. What tip diameter would be required to fit for example, blue hydro and/or vespe bi-core light (pink elastic).

        and finally,

        If the multi bore kits are not ideal, what dawa top 3 kits would be suitable (best).

        Thanks .

      • #99510

        TF_Nigel.

          Most of us take the no 1 out and fit a bush to the no2 section. Then you can have all your elastics and tops the same lenth.
          The new system sounds good, i have managed to get all my tops the same length, weather its red hyrdo or 2 elastic, i took a bit of messing about getting different bores, but worth it.
          This weekend i swapped from 2 to blue, and if they had been different lengths it would have been a pain.

        • #99529

          TF_dirkdiggler

            @Rankoutsider wrote:

            Good moringing everybody

            Just a couple of quick questions

            1. Do the Daiwa Multi Bore top 3 kits fit the Daiwa Airity.

            2. What tip diameter would be required to fit for example, blue hydro and/or vespe bi-core light (pink elastic).

            and finally,

            If the multi bore kits are not ideal, what dawa top 3 kits would be suitable (best).

            Thanks .

            1. yes they do fit your match kits.

            2. i’d say the blue would fit through a 3mm one,
            my only complaint about them is the elastic you can get through them is no where near stated with internal bushes.
            i.e the 4mm one which is rated red hydro?
            you’d be lucky to get red hydro through it with no bush in it at all.

            3. they are definately the way forward not quite as light as a match kit but way lighter than a big bore.
            but being able to buy them all the same length is great not to mention the easily interchangeable no1s only being £12.99! bargain.

          • #99537

            TF_squatt

              Yes they will fit, however, they are not as well balanced as a T3MK top with the no.1 removed and you will notice the difference when fishing 13m+.

            • #99542

              TF_Anthonywaters
              Participant

                To echo what Nigel says I just take all my no 1s out of match kits job done all same length they work perfectly I dont feel the need to change.

              • #99611

                TF_dirkdiggler

                  @squatt wrote:

                  Yes they will fit, however, they are not as well balanced as a T3MK top with the no.1 removed and you will notice the difference when fishing 13m+.

                  i think you’ll find thats because they are considerably longer.

                • #99640

                  TF_squatt

                    In theory good system but they’ve used cheap carbon, T3MK’s are better quality.

                  • #99662

                    TF_samstone

                      ive got 4 of these for sale
                      all top 3s 2 brand new not cut and 2 used
                      but immaculate how much should i ask for them?

                  Viewing 7 reply threads

                  You must be logged in to reply to this topic.