N.G floats

This topic has 16 replies, 10 voices, and was last updated 15 years, 12 months ago by TF_nick_the_2nd.

Viewing 16 reply threads

Author

Posts
- 09/04/2010 at 3:38 pm #38586
  muffy
  Just a quick note to thank nick for my floats which turned up this morning, after spending almost 70 quid on them i was well happy when i just got home to some shinny new floats in less than a week, this is the first time i have bought hand made floats but after borrowing a couple at the recent bait-tec festival i just had to have some as they are superb for what i wanted them for and almost indistructable. ~clap ~clap ~clap ~clap ~clap
- 09/04/2010 at 4:17 pm #101622
  TF_geepster
  Participant
  I agree, the finishing is top rate and they look very strong. Not actually used mine yet though.
- 09/04/2010 at 4:31 pm #101629
  TF_kid_a
  I’ve been using them for 2 months now and they are outstanding, the patterns are spot on. ~clap
- 09/04/2010 at 4:38 pm #101631
  Anonymous
  is there a website please?
- 09/04/2010 at 4:41 pm #101632
  TF_Bingo Wings
  Participant
  Here you go Andrew
  http://www.float-store.co.uk/
  
  Lee.
- 09/04/2010 at 4:43 pm #101633
  Anonymous
  thanks lee mate.
- 09/04/2010 at 5:01 pm #101640
  TF_MarkT
  Nicks floats are top draw, just ordered my third batch this week and it won’t be my last.
- 09/04/2010 at 5:02 pm #101641
  TF_Bingo Wings
  Participant
  Anytime pal.
- 09/04/2010 at 5:20 pm #101645
  TF_Decaff
  Ordered some Pellet Wags earlier in the week,hope they’re as good as they look.
- 09/04/2010 at 5:30 pm #101648
  TF_Bazza
  Participant
  And you won money using them!!!! Enjoy them Muffy just ordered some more myself.
- 09/04/2010 at 7:23 pm #101678
  muffy
  i was just gutted you took them back off me bazza, but i have got loads of my own now, all i have to do now is buy more winders and a new level for my box this is getting expensive oh and tie them up, already getting earache of the boss and i have only done a few,
- 09/04/2010 at 7:51 pm #101686
  TF_paulcarpenter
  muffy how are (any advice for viaduct tomorrow)
- 09/04/2010 at 8:13 pm #101690
  muffy
  the best bit of advice for viaduct is draw on some fish mate there is going to be some s**t peg in that bag, i do think the fish will be out of range of the pole (bar edge pegs) and start of nice and gentle with the feed mate, if they are in front of you, you dont need to give them loads good luck mate hope you draw a flyer
- 09/04/2010 at 10:06 pm #101710
  TF_nick_the_2nd
  Thanks for the comments, am pleased you all like the floats
  
  Ive been working on/testing two new patterns a classic teardrop shaped body that will make a good all-round float. These will have a wire and glass stem option.
  
  Another idea I can’t take credit for, I had a guy ask me to produce a drift beater type float with a long tip and these are the first one built to his spec that will be tested over the next few weeks, they have a 0.8mm glass tip running into a hollow plastic bristle.
- 13/04/2010 at 10:50 am #101975
  TF_Decaff
  Just got my Pellet Wags,Beautiful!
  
  Can’t wait to use em,Staff Moor 3wks & counting!!
- 13/04/2010 at 12:04 pm #101980
  TF_ubat
  @nick_the_2nd wrote:
  
  they have a 8mm glass tip running into a hollow plastic bristle.
  
  Should that be 0.8mm ~think LOL
- 13/04/2010 at 1:25 pm #101988
  TF_nick_the_2nd
  @ubat wrote:
  
  @nick_the_2nd wrote:
  
  they have a 8mm glass tip running into a hollow plastic bristle.
  
  Should that be 0.8mm ~think LOL
  
  Oh yes……Or they might be just a very big float!
Author

Posts