Who wraps and bushes top kits….

[TF_Daz Newell]

After some top kits fitting with side pulla’s.
Who does a good job or should i wait and swap my top kits for factory side pulla’s.

[TF_Mick Fordham]

It’s not that hard to do them yourself (as long as you have a bit of time)..

I’ve just converted 12 top kits to side pullers over the past week (and repaired a No.5 section as well).

You can buy a fishing pole repair kit from Carbon Mods (I now just buy the parts I need rather than the kit, but to start with the kit will help you out). They have a video on thier web-site which gives you the basics of how to do it…

Have a look…

If you are not good with your hands then contac the pole repair guys as some of them will do a wrap and bush your kits for you).

[TF_boss baitParticipant]

@Daz Newell wrote:

After some top kits fitting with side pulla’s.
Who does a good job or should i wait and swap my top kits for factory side pulla’s.

there is a guy in bolton (steve) who does it not sure how much will try and find his no.i have used him before and would again

just found this

http://www.speedypolerepairs.co.uk/

think that is him

[TF_roblfc3412]

Danny Sixsmith Pole Repairs top job 😀 😀 😀

[TF_Hillbilly]

Mick Wilkinson does them.

[TF_Mike Herrington]

Craig Mellings who comes on here does them. he double bushes them also. He is Shipley based.

[TF_Johnny Mac]

Daz, take them to Stu in the shop, he’ll give them to Danny Sixsmith.

[TF_Daz Newell]

cheers guys.
Hi Jonny Mac..yeah he mentioned it today

[TF_morris85]

@Mick Fordham wrote:

It’s not that hard to do them yourself (as long as you have a bit of time)..

I’ve just converted 12 top kits to side pullers over the past week (and repaired a No.5 section as well).

You can buy a fishing pole repair kit from Carbon Mods (I now just buy the parts I need rather than the kit, but to start with the kit will help you out). They have a video on thier web-site which gives you the basics of how to do it…

Have a look…

If you are not good with your hands then contac the pole repair guys as some of them will do a wrap and bush your kits for you).

i have just bought this kit mate how did you do ie size of wrap and size if drill etc pm please with details 🙂 🙂 🙂

[TF_Mick Fordham]

Morris,

Carbon Mods have a video on thier web-site which helps to start you off (it’s also on YouTube).

However there are a few tricks to get a good finish to the wrap (which I’m more than happy to help you with)..

I reckon it has cost me about £4 a kit to convert them (and this includes the price of the bushes)….

Once you have watched the video give me a PM, it may be better for you to call me so I can run-through what I did (I will PM you my Mobile No.)…

If you spend a bit on time on them you can get them looking almost like a manufactured job… All my mates who I have shown mine to want me to do there’s now!!!

[TF_dunno]

@boss bait wrote:

@Daz Newell wrote:

After some top kits fitting with side pulla’s.
Who does a good job or should i wait and swap my top kits for factory side pulla’s.

there is a guy in bolton (steve) who does it not sure how much will try and find his no.i have used him before and would again

just found this

http://www.speedypolerepairs.co.uk/

think that is him

I use him regularly for all my mates in Ireland. He is first class and a true gentleman to deal with.

Highly recommended. 🙂 🙂

[TF_hacheema]

Converting flv files to mp4 format on mac, see
http://www.ilikemall.com/how-to/convert-flv-to-mp4-mac.html
It can also convert flv flash video to other common videos.

[Author]

Posts