New pole £2000 max

Home › Forums › Fishing › Fly Fishing › New pole £2000 max

Viewing 11 reply threads
  • Author
    Posts
    • 14/11/2007 at 7:41 pm #30326

      TF_C.S.H
      Participant

        Time for a new pole.
        Been using a Daiwa Whisker for best part of 5 years and its been a good bit of kit. But time for an upgrade.
        Thinking of staying with Daiwa so I can use the top kits but the Preston GIS10 thread is food for thought, whats the GIS10 like with heavy elastics.
        Fish mainly for carp, max out at purple hydro on elastics and use black hydro for most of the year.
        Loads of choice out their.
        Sensas Power Match 664
        Spectron Power
        Tourny Pro
        Shimano Aspire AX
        all sound good.
        Any advice.

      • 14/11/2007 at 10:05 pm #67740

        TOURNAMENT-TOM

          i use a tournament pro and have never broken it and have had carp to 17 lb on match kits with the no 1 taken out, extreemly well balanced, my only criticism is the finish on the butt sections, can get a bit ‘ squeeky ‘ with wet hands but cant fault it apart from that

        • 15/11/2007 at 9:33 am #67741

          TF_scottyp

            I’ve got the Speccy power and absolutely love it to bits. used for everything i could think of, and not had a single problem with it.
            But i agree with TT above that the finish is iffy on the butt sections when the pole is drying after getting wet, or your hands are damp.Fantastic spares, and the Daiwa generic kits are top drawer also.

          • 15/11/2007 at 2:20 pm #67742

            keswick

              had a spectron superb now got tourney pro i suffer with slight back probs and at 16mtrs a joy 2 use ex in wind same as any pole agree no 4 not the strongest but in 3yrs only broke1 but lost1 large carp must be more careful also why no cuppin kit on a £4;000 pole gud luch

            • 15/11/2007 at 2:21 pm #67743

              keswick

                should say good luck?

              • 15/11/2007 at 5:46 pm #67744

                TF_C.S.H
                Participant

                  Cheers for the feedback.

                  Pretty much made my mind up on the Tourny Pro.
                  But will the match and power top kits I have for my Whisker fit the Touney Pro?
                  This will be the deciding factor.

                • 15/11/2007 at 6:00 pm #67745

                  Maesknoll

                    I’ll add my support for the TP, I’ve landed carp to 24lb on mine, I had a split in the No7 section ( noticed the third time I used it) apart from that, no problems. Daiwa replaced the No7 section in a couple of days with no quibble.

                    I’ve bought extra match kits, power kits and generic top threes, all readily available.

                    It’s a very strong pole, I’ve used mine with purple hydro & 0.19, but it’s equally at home with lighter elastics and 12oz nooklengths catching roach and skimmers on the canal.

                  • 15/11/2007 at 6:05 pm #67746

                    TF_C.S.H
                    Participant

                      Thanks HST Doctor.
                      Not worried about availabilty of top kits, more of a cost saving excercise if the top kits I have will fit the Tourney Pro.

                    • 15/11/2007 at 9:34 pm #67747

                      TF_freddy the frog

                        your top kits including 4s will fit a pro

                      • 15/11/2007 at 10:00 pm #67748

                        TF_freddy the frog

                          C.S.H.if your seriously intrested in a Pro see my thread on the course forum relisted 15.11.07
                          under pro for sale.

                        • 16/11/2007 at 11:24 am #67749

                          TF_craigo

                            I’ll throw another spanner in the works CSH!

                            your top 4’s from the diawa will also fit the Lerc GIS10 – the match/power kits are very slightly oversized but used with a No 4 there is no probs at all – the GIS No 4 section fits the daiwa’s as if it was made for it – also useful for any diawa owners that may want to use some of the Lerc range of topkits such as short stops, puller kits etc.

                            When I broke a No 6 on my GIS (my fault) – I used an old Daiwa 412 but with GIS top 4’s while I waited for my replacement section – the diawa was a miles better with the Lerc kits on too.

                          • 16/11/2007 at 12:21 pm #67750

                            Kingman

                              Craigo,

                              Thats rather good news for me too. So the top kits from my Speccy will fit the GIS 2G10 or the 10 Absolute as long as I keep hold of my no 4 section?

                              Interesting thought

                          • Author
                            Posts
                          Viewing 11 reply threads

                          You must be logged in to reply to this topic.