Which Meat Cutter

Home › Forums › Fishing › Coarse And Match Fishing › Which Meat Cutter

Viewing 16 reply threads
  • Author
    Posts
    • 19/11/2010 at 8:34 am #43072

      TF_Stevie H

        I have been pondering over which meat cutter/s to buy. I am looking for a 6mm & 8mm.

        The concept of the MAP cutter caught my eye with the interchangeable blades, but I have heard mixed reviews about it.

        I notice that there are some Tilley type imitations on Fleabay. Has anyone bought these? Are they any good? The only difference that I could imagine would be that the wire would be soft and flimsey.

        I think my options are and would appreciate comments on the following:

        1. Tilley (although they don’t do 8mm)
        2. J Range
        3. Maver
        4. Sonu
        5. Waterline
        6. Cheap Fleabay rip off

        Steve

      • 19/11/2010 at 10:00 am #122490

        TF_Paddy

          I had this dillema, buit i went to the tackle shop and got the map one out and had it explained to me.
          then went to look at my mates cutter made by Tilley.
          I went for the map one and love it!

        • 19/11/2010 at 11:45 am #122501

          TF_stevie b

            MCM. I bought a set after watching Mick Wilkinson cube a tray of meat in minutes!
            They come with spare wires too. I’ve had mine a few years now and not had to replace the wires yet.

            Available in loads of sizes. Not the cheapest though! A quality piece of kit. Sold at Whiteacres, Davies angling and possibly direct from the manufacturer still.

          • 19/11/2010 at 12:48 pm #122512

            TF_Decaff

              Map. I looked at the Tilley but went for the MAP, can cut tins in seconds, throw in the dishwasher & forget about it.

            • 19/11/2010 at 1:25 pm #122516

              TF_boss bait
              Participant

                never used the map ones but have had a tilley for a few years and cant fault it

              • 19/11/2010 at 1:25 pm #122517

                TF_breamgod
                Participant

                  theres a meat cutter on ebay it red and from a1 angling these are the best type push it in the top slices it first drops into another part then push it through again and it dices it dont have to touch it with your hands at all

                • 19/11/2010 at 2:20 pm #122523

                  TF_Chris-turner
                  Participant

                    map are by far the best cutter out there imo,

                  • 19/11/2010 at 2:29 pm #122527

                    TF_mini me

                      stevie

                      i have used the Map meat cutter since it was released and have never looked back.

                      cheers

                      dean

                    • 19/11/2010 at 5:02 pm #122559

                      andy85
                      Participant

                        mcm’s as the map ones cut the meat slighty smaller than mine. well they prob cut it a true 6mm but i prefer it to be more like 7mm. save ur money for now an wait till meat starts workin again might be sumat new out by then

                      • 19/11/2010 at 5:14 pm #122562

                        TF_Stevie H

                          @andy85 wrote:

                          save ur money for now an wait till meat starts workin again might be sumat new out by then

                          Andy, I want it for now mate as the meat is a goer at this time of year on the venue I want to use it on.

                        • 19/11/2010 at 6:41 pm #122576

                          TF_jwb

                            MAP~clap ~clap ~clap ~clap ~clap

                          • 20/11/2010 at 11:34 pm #122799

                            TF_Stevie H

                              Thanks for the replies guys…..

                              No negatives for the MAP from anyone…the reviews I saw were from a while ago so if there was a problem in their early days then perhaps now its resolved.

                              Seems like the MAP it is then.

                              Ta again.

                              Steve

                            • 21/11/2010 at 9:19 pm #122869

                              TF_thedog

                                i have the map one, its a good bit of kit but if you dont have a dishwasher its a pain to clean especially when cutting the 4mm cubes. ultimate advertise a set of three different size metal cutters for £25 BARGAIN!

                              • 24/11/2010 at 1:39 pm #123153

                                TF_ubat

                                  Found the 4mm a pain on the MAP, but very good on the larger sizes, 6mm & 8mm

                                • 25/11/2010 at 3:37 pm #123291

                                  yorkiboy

                                    Used Tackle do 2 cutters or 3 cutters, I don’t think ultimate do cutters

                                  • 25/11/2010 at 4:54 pm #123304

                                    TF_thedog

                                      sorry it wasnt ultimate that advertised them but it is a set of three for 25 quid

                                    • 25/11/2010 at 5:15 pm #123305

                                      TF_Stevie H

                                        Is it the Avanti ones that you are on about?

                                        I did see a post on MD’ers that someone had been using them for a couple of years with no wire breakages or any problems at all.

                                        Seems like a bargain to me….£25 for 4, 6 & 8mm cutters.

                                    • Author
                                      Posts
                                    Viewing 16 reply threads

                                    You must be logged in to reply to this topic.