dacron connecters

Home › Forums › Fishing › Coarse And Match Fishing › dacron connecters

Viewing 9 reply threads
  • Author
    Posts
    • 29/11/2010 at 1:35 pm #43283

      TF_mannymaggot

        Hi guys i thought id try some of these but how do you attach your rig to the connector?Do you put the loop of your rig through the loop on the connector and then pass the hook shot and float through the loop of your rig.?~think ~think ~think

      • 29/11/2010 at 1:56 pm #123629

        TF_baitchef
        Participant

          One of the best methods is the double loop. Its a bit tricky to put into words, but if you google it there are diagrams and even videos and you should be able to work it out. One tip is to cut the top loop to stop it from snagging.

        • 29/11/2010 at 2:02 pm #123630

          TF_Anthonywaters
          Participant

            Ive only been using them a month myself their spot on I just used a single loop I dont find any need for the double loop but i have found that by dividing the dacron into two when your finished you can easily get your rigs back off.

          • 29/11/2010 at 2:06 pm #123631

            TF_mannymaggot

              Thanks Anthony.So like i said put the loop abve my float through the dacron and drop the hook ,shot and float through the loop,then take it off like you say.

            • 29/11/2010 at 2:29 pm #123637

              TF_Anthonywaters
              Participant

                Manymaggot just pull a bit of line back through the hole of the loop then trap it on the connector same principal as what your saying.

              • 29/11/2010 at 2:34 pm #123639

                TF_mannymaggot

                  you what.lol

                • 29/11/2010 at 2:53 pm #123641

                  TF_Anthonywaters
                  Participant

                    Make a loop and pass an inch of line back through it then when you put your conector through this it will slide and trap sort of like a hangmens noose

                  • 29/11/2010 at 3:05 pm #123643

                    TF_Stevie H

                      [img]C:Usersnhq.steve.hutterDesktopdacron_line.jpg[/img]

                      Not sure if this will work. If not then just do a search on google images for ‘attaching line to dacron’ and this is the first image that you see. Simples 🙂

                      Steve

                    • 29/11/2010 at 5:08 pm #123662

                      TF_mannymaggot

                        Cheers Anthony sorted now, how simple do they never come off?

                      • 29/11/2010 at 5:11 pm #123663

                        TF_Anthonywaters
                        Participant

                          If you want Two loops just tie Two overhand loops people find this easier to take off as I said I just part the two bits of braid and unpick the rig

                      • Author
                        Posts
                      Viewing 9 reply threads

                      You must be logged in to reply to this topic.