Home › Forums › Fishing › Coarse And Match Fishing › Bream feeder rod
- This topic has 20 replies, 16 voices, and was last updated 15 years, 5 months ago by
TF_drawbag1967.
-
AuthorPosts
-
-
15/01/2011 at 4:33 pm #44055
jp43After years on Carp pools going to start again on bream, skimmer, and roach waters so which rod do I get ?
-
15/01/2011 at 5:43 pm #128566
yorkiboyHow long a rod?
-
15/01/2011 at 6:01 pm #128567
TF_baitchefParticipantThere are tons out there but the Shakespear are very good value, in as much as you get quality fittings at a very competative price.
-
15/01/2011 at 6:19 pm #128568
TF_squattWhat waters – stillwaters, big or small? Rivers? How far are you chucking? How much can you spend?
-
15/01/2011 at 7:19 pm #128572
jp43I thought 11ft 6 ish still waters chucking about 50 yds
Been looking at Preston c series so no more than £140
-
15/01/2011 at 9:29 pm #128585
TF_squattIMO 12ft as a minimum I would opt for a Daiwa 11/13, Shimano 13ft Speedmaster or have a look at new Fox FX range.
-
15/01/2011 at 9:35 pm #128587
TF_North EnderIf you are looking at C Series, ring Ted Carters in Preston. You’ll be pleasantly surprised at their prices.
-
15/01/2011 at 9:56 pm #128589
TF_rocketFeedertake a look at the legend 3500, nice rod.
-
15/01/2011 at 10:19 pm #128591
TF_thedogthe original 11/13ft carbonactive is the ultimate bream rod, problem is getting one!
if i was going to replace mine i would opt for the preston 13ft competition feeder. Reason being the lightest tip is 2oz but with braid exagerating bites you could get away with a 2oz tip. If it was only to be used with mono take a look at the Excel 12’ 6″ feeder , this is supplied with 1,2,3,oz tips but also a super light tip can be bought to fit the rod. as a previous reply said Ted Carters have some top deals on at the mo -
15/01/2011 at 10:21 pm #128593
TF_boydieParticipantAnother vote for the Shakespeare’s – The Superteam Feeder is superb, one of the most versatile on the market. If you’re after a two piece try the 11’6 Mach3,another great rod and cheap compared to other manufacturers.
-
15/01/2011 at 11:09 pm #128595
TF_dave brittainIf you can have a look at a Shakespeare Superteam 11/12/13. You get three seperate butt section and the rod covers 95% of my still water work from commercial carp to skimmer as roach.
You can pick them up for jusdt over £100 and the rod is superb, very similar to the carbotec’s but with slightly more power further down the blank
-
15/01/2011 at 11:47 pm #128597
TF_redarmydave there very similar to the carbotecs in the fact that they both have a reel seat lol
-
16/01/2011 at 6:39 am #128599
TF_bremesParticipantTry and source an original Normark 12ft multi tip,job done.
-
16/01/2011 at 10:21 am #128606
TF_dave brittainRedarmy
In the October Stafford Moor festival we compared my Superteam to Chris Haines 12ft Carbotec when we were pegged beside each other.
The blanks were very similar and we concluded that the Superteam was slightly lighter with possibly more power through the middle. Chris was more than suprised.
The original Maver Reactolite No 1 tip which is finer than the Superteam No 1 tip also makes the rod into a superb winter skimmer/roach rod, ideal for venues like Porth where the bites can be very finicky, (the tip fits like a glove).
-
16/01/2011 at 3:11 pm #128615
TF_drawbag1967Drennan IM8 if you can get one, there perfect.
-
16/01/2011 at 3:46 pm #128616
TF_Mike SmithTry the Tri-cast Perfection 120 or 125,can’t fault the 125 for better (4LB +) bream. It’ll throw a Drennan large open ender 50+ yards.
Bream on
-
16/01/2011 at 4:16 pm #128617
TF_Leaky Lloyd12 ft preston carbon active,,origional (asaki version)
or daiwa connoissuer zboth very good rods and perfect for bream fishing !
-
16/01/2011 at 5:27 pm #128623
TF_dave brittainSee http://www.tedcarter.co.uk/product.php?pid=shakespeare-superteam-111213ft-feeder-rod-79512
At £96 it’s a steal
-
17/01/2011 at 6:02 pm #128717
TF_The chimpThe Fox Vairo if you can get your hands on one or the new Fx range or the shakespeare superteam feeder come in all shapes and sizes…..~think ~think
-
17/01/2011 at 6:44 pm #128720
TF_mp.milo50-60 yd chuck,i use the original preston sentinent 11.6,the ones with the short handle section,lovely rods.
-
17/01/2011 at 6:57 pm #128723
TF_drawbag1967Have a look in the For Sale section Chuuby’s got a Drennan Super Feeder for sale, perfect for what you want.
-
-
AuthorPosts
You must be logged in to reply to this topic.

