ive got a couple of these for my Z9. Gonna buy some more cos they work really well. I know they fit some mavers and sensas poles but not sure about Tricast. ROPA usually answers this stuff about brownig you could PM him.
Says in their ads that you can email them direct for info as well.

I`ll get onto Rep for you mate, Sheffield Fishing Republic should be able to order them in for you, so will be following up on it. Leave it with me and I`ll get some info for you

The Light Tension Puller Kit weighs 35g and is 2.60m long, elastic up to a 16.
Heavy weighs in at 64g and is 3.00m long, and you can use really heavy elastics for margin fishing.I`ve made a few calls mate, and fishing republic will find out if there are any at their shops or warehouse. Failing that I will contact rep tomorrow and sort it.

I paid £70 for mine but think theyre 80 rrp.
ROPA to the rescue again, you should be on commision mate. Why dont Browning get their arse in gear and get their gear into the shops ? Ive bought a fair bit of their stuff recently and its all been brill including 2 new rods, but its so hard to find it in shops. Loads of gear on their website id like to have a look at and if i lived near you i’d be round your house !!

I use a few browning rods, if you go for the top end range of their rods they are brilliant.

My local tackle dealer has been waiting for a call back now for over a fortnight from the local Browning rep, as he’s trying to get me one of the 14 foot King Feeder rods to have a look at.

Not exactly cutting edge customer service, makes you wonder whether they want to sell any gear!

I know there’s a lot of interest in these feeder rods.

What shop is it and what area??

Ropa: Its Pickerings of Burslem in Stoke On Trent.

Any assistance would be greatly appreciated.

Cheers
Amo
~clap

Baggng Machine,…Fishing Republic in Barnsley have them in, give Mick a phone on 01226 752300 and he will sort you out mate.

ropa, someone earlier in the post summed up Browning. There is some great gear at the moment but it’s all in the catalogue and not in the shops. How many people have handled a Z9 or King Feeder and where are the new drop feeders. They need a rocket up their a*se.

You are right mate, we need to get the gear in the shops, but in todays financial climate it`s assuring tackle dealers that it is that good and it will sell. I know to lads who are wanting to see it now, it aint good enough, but our reps and sponsored anglers are slowly changing the opinion of anglers and tackle dealers that Browning are producing top quality match fishing tackle once again. Browning are upping their effort on the U.K market by bringing in top quality reps and sponsoring more teams and individuals. Hopefully in the near future by hard work we will see Browning tackle in a lot more shops and available to more anglers.

Quick reply as always ropa. Some of the tackle is soooooooooooooo right – strike while the iron is hot though.

We trying mate, hoping in the next month to finalise plans for a lot more open days around the country in tackle shops to show the gear to the public.

Cheers Ropa for all your help.

Ta
Amo
~clap

Don`t know what the joint size of the tri-cast is , but the puller kits have an internal joint size of 22mm.

ropa, when tony watson finally gets his z9 lol i’ll try one of his kits on the trilogy. looks some where around 22mm. been told browning cc 850 kits fit like a glove are they the same as z9 dia wise?????

as ROPA says, i think that the shops are half the problem. We miss out on a lot of good gear from browning, colmic, tubertini and the like cos shops wont stock it – dunno about you but im fed up with seeing the same old preston and drennan stuff in every shop i go in. The shops that do have this gear seem to be making a killing at the mo. My mate phnoned Colemans fishery for a price on a Z9 and the bloke told him theyd sold five Z7.5 and a Z9 in the last fortnight.

Martin, he will be getting his Z9 this week, he couldn`t get it until I sorted his contract out with Germany. They will more than likely fit, all Browning poles are made to be interchangeable regarding top kits, I`ll check for definate as the CC`S were the previous range before the Carboxy and Xitan range came out.

@ropa wrote:

Martin, he will be getting his Z9 this week, he couldn`t get it until I sorted his contract out with Germany. They will more than likely fit, all Browning poles are made to be interchangeable regarding top kits, I`ll check for definate as the CC`S were the previous range before the Carboxy and Xitan range came out.

will that stop him going into the little boys room at fishin republic with pictures of a z9 and comin out 30 seconds later with a “drained” expression lol

Ha, ha, you not the first to say that!! wait until I see him tomorrow.

@ropa wrote:

Ha, ha, you not the first to say that!! wait until I see him tomorrow.

the other staff in the shop telt me mate lol

any news on if the z9 kits fit the trilogy yet
how much do the striper kits weigh any idea also who is doing them at the best price
cheers

@sam the man wrote:

any news on if the z9 kits fit the trilogy yet
how much do the striper kits weigh any idea also who is doing them at the best price
cheers

have a look at MAP tops, they fit the Zeds perfectly, and will be easier to source. the proper match kits are great (map i mean as well as browning) and if the MAP kits fit the trilogy then the browning kits will fit. (all are 22mm) your man said the strip kits were 35 grams i think.

Any lads wishing to see the light puller kits, Z9`s, King feeder range, we will be having 2 open days in the North and hopefully more around the country. Saturday August 6th myself, Adam Richards and some of the Browning Quaker lads will be in the Sunderland Fishing Republic Store to show you the gear. And a week later Saturday August 13th I will be with Bob Nudd in the Barnsley Fishing Republic Store. Come along and a have a look. Anybody travelling to the Tacklefest this weekend at Peterborough, pop into Strike Master tackle tent as he will have the Range of King Feeder rods and at a show price!!!!

Ropa, I will be with you on the 13th mate as Nick has pulled a favour from me. He has the Final of the Maver pairs or something like that so i said i would cover this day for him.

Im Lee by the way the new (ish) rep for the North West.

Browning customer service is awful. I broke the number 7 section of a £2k plus pole which had been out of production for 2 years.
Their nice man in Germany could not find a replacement and told me that as I had had the pole for 4 years I should be looking to replace it anyway – but not with Browning!!

fishing republic were like that with me when i ask about a browning product….they just didnt want to know.

RJM, What pole have you got or did you have?

Sillysod, thats strange as Fishing Republic are one of our biggest customers. And as Ropa has already said they are due a few ‘Bob Nudd days’ very soon.

Have to agree with rjm,browning germany are terrible and they let the uk browning reps down big time,who i found to be excellent.main reason why i no longer have a z9.

Problems we have had in the past are being addressed and communication with our headquarters in Germany are being sorted. I don`t know anybody`s individual circumstances regarding problems so can`t comment. If anybody has questions regarding poles please E-Mail, [email protected] or if you have a part to be returned, repaired or spare parts E-Mail, [email protected]

ropa going to Tackle Fest tomorrow to get a 14 foot KF off Mick Hope. Can you sort me out with a selection of specialist cage feeders(large) as mick hasn’t got any. A trade pack will do or 40-80grams at a push 😀 . Pretty please.

Got my 14ft king feeder today, great rods for big chucks, I have 3 now. Thanks for the pm ropa, I’ve pinged you one back.

Sorry Big Fin only just seen your question.

The pole is a Champions Choice 990 – nothing wrong with the pole, just the after sales service.