Method feeder fishing

This topic has 10 replies, 10 voices, and was last updated 13 years ago by mak.

Viewing 10 reply threads

Author

Posts
- 26/03/2013 at 12:46 pm #54644
  TF_Smed
  Ive always used preston method feeders along with either the preston connectors or the korum quick change beads, but recently ive changed to drennans..the reason is simply down to liking the idea behind the drennan connector, so i can change from method to bomb, and also the size of the method etc…
  now last weekend was the first time ive used the drennans, and i couldnt get on with the moulds at all! just couldnt get it out in one piece! also how the hell do you thread the loop through the method feeder? do you need a long baiting needle to pull it through?
  im thinking now of going back to the prestons, simply because the moulds have the quick release button and is easy to get out, but using the drennon connectors with a long baiting needle to pull loop through…
  or is there any better alternatives???
  
  btw my club insists on inline free running feeders/bombs only
  
  thanks!
- 26/03/2013 at 3:24 pm #165903
  TF_Matress
  Just thread the line through and tie a loop???
- 26/03/2013 at 7:52 pm #165910
  TF_Hullkr66
  Go back to the Preston Method and Mould. Cant beat it, or the quality
- 27/03/2013 at 8:44 am #165922
  TF_spotter1707
  Keep the method mould wet, by keeping it in water in a bait box. The pellets need to be damp & not too wet, if they are they will stick in the mould. Try sprinkling the pellets with swim stim or method mix.
  Regards Peter.
- 27/03/2013 at 11:17 am #165926
  TF_Smed
  @Matress wrote:
  
  Just thread the line through and tie a loop???
  
  yeah thats what im doing, thing is if/when i do want to change method size or weight, or change to a bomb then back to a method it means i have to bite off the loop and re tie another, seems a bit pointless and wastes time IMO. i was infact using groundbait not micros at the weekend, still i cant see the micro mould coming out intact out of the drennan mould? looks like i will go back to prestons moulds/feeders with drennan connectors and look for a long baiting needle to pull loop through……
  thanks guys!
- 27/03/2013 at 11:23 am #165927
  TF_mart4666
  @spotter1707 wrote:
  
  Keep the method mould wet, by keeping it in water in a bait box. The pellets need to be damp & not too wet, if they are they will stick in the mould. Try sprinkling the pellets with swim stim or method mix.
  Regards Peter.
  
  Try hoyin the moulds away.theyre crap.either buy tge guru one.it fits yr drennan feeders or go back to the prestons as most people say.;-)
- 27/03/2013 at 12:01 pm #165928
  TF_Anthonywaters
  Participant
  I bought several drennan feeders and mould and found it difficult at first I had to make it work because I’m damn sure I wasn’t spending any more money, put some grease inside your mould I used a load of the greasy scummy water off your meat
- 27/03/2013 at 12:33 pm #165930
  TF_Tarqun
  I’ve been using the Drennan Feeders last year after years of using the Preston ones, i now prefer them as they cast better and can carry more feed.
  
  I experienced issue getting the feeder out in the beginning but overcame that by sticking my nails on the edge of the feeder and pulling it out slightly while gently pressing down on the base of the mould and out it comes. i do this regardless of if i’m using pellets or crumb.
  
  I’ve not had to resort to keeping the mould damp or lightly grease it just use it as it come out of my bag.
- 29/03/2013 at 9:00 am #165968
  TF_Blankerman
  Participant
  I mate I experienced this problem to start with. What I have found is if you squeeze the sides of the mould quite firmly after you have compressed the bait on it releases a lot better.
- 29/03/2013 at 9:21 am #165969
  TF_P-RoloGIC
  If you want a method threader go to ted carter they stock a loop threader brilliant for threading method feeders.Also the best mould for drennan feeders is the matrix large mould also from ted carters.
- 31/03/2013 at 3:05 pm #166026
  mak
  the guru mold fits the small feeder
  the drennan is best for long range it dose not wobble in flight i can get more range our of the drennans
  with the drennan mold not had a isue with it at all sticking once i drilled 4x 3mm holes in it to alow air into it for getting out in one
Author

Posts