Fox 50mm Skid Bung

This topic has 41 replies, 13 voices, and was last updated 15 years, 4 months ago by TF_paulD.

Viewing 41 reply threads

Author

Posts
- 01/02/2011 at 2:57 pm #44438
  TF_NathanWatson
  Anyone know anywhere that sell these or anyone have 1 to sell?
- 01/02/2011 at 8:36 pm #130608
  TF_proper tidal boy
  nathan try davies angling they have some, but not skid bung just large rubber ones that will protect pole end, when shipping back which will allow you to push through bushes or chain link fencing
- 01/02/2011 at 8:46 pm #130611
  TF_NathanWatson
  @lump wrote:
  
  is this for your Z9? i’ve got one too, it’s a fat bugger at the big end. And no, sorry, i don’t know.
  
  Yes mate.
- 01/02/2011 at 8:47 pm #130613
  TF_NathanWatson
  @proper tidal boy wrote:
  
  nathan try davies angling they have some, but not skid bung just large rubber ones that will protect pole end, when shipping back which will allow you to push through bushes or chain link fencing
  
  Thanks, got the end caps that will do that but prefer a skid bung, think they strengthen the end aswell to stop you putting your elbow through!
- 01/02/2011 at 9:06 pm #130618
  TF_paulD
  I use a Seymo expanding bung in my 9. Can use it in 14.5 & 16 sections. You need to by the good quality one though. The cheap chinese copies look identical but are u/s and stop working after a while. I still think the drennan ones are best but its hard to find them now.
- 01/02/2011 at 9:24 pm #130625
  TF_NathanWatson
  Got a Seymo but think it’s crap to be hoest, falls out and doesn’t offer much of the reinforcement.
- 01/02/2011 at 9:41 pm #130629
  TF_paulD
  mine stays in ok but I only use it to keep out stones and to push it through bushes. just screw it up a bit tighter ! not too much though as I cracked a Maver butt using one once.
- 01/02/2011 at 10:33 pm #130642
  TF_paulD
  Just seen some 48mm drennan skid bungs advertised. Put a put a few rubber o rings over and into the slots and it would probably be firm in a 50mm section
- 01/02/2011 at 11:49 pm #130646
  TF_Craigy H
  Leave it with me i will have look in my local tackle shop friday. he has them……….
- 02/02/2011 at 9:24 am #130656
  TF_NathanWatson
  Thanks lads.
- 02/02/2011 at 10:20 am #130665
  TF_lloydy1970
  I’ve got 2 52mm one’s if they’re any good
- 02/02/2011 at 10:22 am #130666
  TF_NathanWatson
  Yes, might even be 52mm I really meant! Probably be perfect for 16M section, how much you want for it mate?
- 02/02/2011 at 12:21 pm #130668
  TF_proper tidal boy
  any more out there folks looking for e set for a tourney pro ??
- 02/02/2011 at 1:03 pm #130670
  TF_NathanWatson
  I’ve got a Seymo 1 you can have FREE mate!
- 02/02/2011 at 6:40 pm #130692
  TF_bign
  Participant
  Some on Ebay
- 02/02/2011 at 9:45 pm #130714
  TF_andynorth2003
  Participant
  Here you go Nathan, think this is what bign is referring to:
  http://cgi.ebay.co.uk/PIKE-BUNGS-X2-1-X-SMALL-1-X-LARGE-/400188550554?pt=UK_SportsLeisure_Fishing_Lures_JN&hash=item5d2d18ad9a
  You also get one that fits the 11.5m section – bonus !!
- 02/02/2011 at 9:47 pm #130715
  TF_andynorth2003
  Participant
  Sorry. wrong link
  http://cgi.ebay.co.uk/Fox-Match-Pole-Shock-Savers-Size-52mm-/180615304148?pt=UK_SportingGoods_FishingAcces_RL&hash=item2a0d82d3d4
- 02/02/2011 at 10:21 pm #130722
  TF_proper tidal boy
  ordered one thanks wether i get it as web site down ??????~think ~think
- 02/02/2011 at 11:11 pm #130726
  TF_NW Cut Angler
  Belgium is the place for you Nathan ~think
- 02/02/2011 at 11:22 pm #130727
  TF_Kevin Leach
  No Nathan needs something bigger.
- 02/02/2011 at 11:58 pm #130730
  TF_NW Cut Angler
  Well used? I thought he would have a new, nice and tight one. Dark horse is Nathan
- 03/02/2011 at 9:47 am #130737
  TF_lloydy1970
  @lloydy1970 wrote:
  
  I’ve got 2 52mm one’s if they’re any good
  
  Buy me a pint if you ever see me. I’m going on stainy Sunday is there anyone I can give it to for you?
- 03/02/2011 at 10:51 am #130742
  TF_NathanWatson
  Chears. Not really who I’ll see soon that I can think of. You practising for a semi final or summat?
- 03/02/2011 at 11:28 am #130745
  TF_lloydy1970
  No mate, just fishing pairs league. Have a think cus quite a few go to lindolme
- 03/02/2011 at 11:31 am #130747
  TF_NathanWatson
  I don’t really go Lindholme mate unless Hayfield is cancelled! You could ask Big Al if he’ll be going Hayfield again soon?
- 03/02/2011 at 1:37 pm #130760
  TF_proper tidal boy
  these photos allways uck the posts after why????? ps drennan have some 48 in but you need a shop to order them ???????
- 03/02/2011 at 1:45 pm #130764
  TF_NathanWatson
  How much in the bargain bucket mate?
- 03/02/2011 at 8:17 pm #130871
  smith7474
  @NathanWatson wrote:
  
  @lump wrote:
  
  is this for your Z9? i’ve got one too, it’s a fat bugger at the big end. And no, sorry, i don’t know.
  
  Yes mate.
  
  How you getting on with z9 might puchasing one soon. Also wheres the cheapest place to get one from? hows it compare to t pro ta
- 03/02/2011 at 8:20 pm #130872
  TF_punchcrumb
  what size fox ones will fit my daiwa spectron power 11m 13 m 14.5 m 16m ?
  
  ANYONE PLEASE
- 03/02/2011 at 10:11 pm #130897
  TF_bwfcjohn
  Participant
  B.A.S.in Bolton have both Drennan and Fox skid bungs in stock.
- 04/02/2011 at 9:53 am #130917
  TF_NathanWatson
  You’ll want 50 or 52mm Fox for the 14.5 and 16M sections, 48mm Drennan for 13M and think 48 again (more squashed in 1!) for 11M but I never fish that close!
- 04/02/2011 at 12:06 pm #130935
  TF_proper tidal boy
  @proper tidal boy wrote:
  
  ordered one thanks wether i get it as web site down ??????~think ~think
  
  recieved today friday one 52 quality service to surrey NATHAN this shop is on your doorstop lmao~clap ~clap
- 04/02/2011 at 1:17 pm #130948
  TF_NathanWatson
  Where’s that mate?
- 04/02/2011 at 3:52 pm #130982
  TF_proper tidal boy
  big catch tackle lakeside chapel st leonards lincs pe24 5tu
  01764872631 only 52s in stock
- 04/02/2011 at 3:54 pm #130983
  TF_proper tidal boy
  big catch tackle lakeside chapel st leonards lincs pe24 5tu
  01764872631 only 52s in stock http://www.bigcatchtackle.com
- 04/02/2011 at 3:56 pm #130984
  TF_NathanWatson
  About 30 miles mate, hardly on my doorstep but thanks! Looks like I’ve got 1 sorted off Lloydy anyway, thanks!
- 04/02/2011 at 4:06 pm #130991
  TF_proper tidal boy
  LUMP thank you for the info have ordered 1×52 and 2×48 posted a tenner lovely jubbly
- 04/02/2011 at 7:02 pm #131008
  TF_proper tidal boy
  Lump why dont you show them what there missing in total fishing forum where they could get more buyers???? then you could get more maggots lol
- 04/02/2011 at 7:39 pm #131010
  TF_yorkshire
  this should do the trick
  
  http://www.inflatablebuttplug.co.uk/
  
  also have some fixed sizes~think
- 04/02/2011 at 8:32 pm #131021
  TF_NathanWatson
  @lump wrote:
  
  @proper tidal boy wrote:
  
  Lump why dont you show them what there missing in total fishing forum where they could get more buyers???? then you could get more maggots lol
  
  i did tell her about the thread. those bungs have been there for ages.
  also, did you know the short 4’s and 4’s from the MAP TKS poles fit the Z9?
  As do the TKS tops. ~shh Â£40 for a short 4. ~shh
  
  Yes, well I heard the tops do, are they any good? Does every section fit or just the top 4?
- 04/02/2011 at 8:35 pm #131023
  TF_proper tidal boy
  lump trianna secret weapon no 4 fits tourney pro DONT TELL NO ONE LOL
- 04/02/2011 at 10:59 pm #131036
  TF_paulD
  All the Sensas 7 range (and I think 6) kits fit the z9 perfectly and the 7s no4s also fit. I also saw a bloke using a Maver kit for cupping but don’t know what pole it was from.
  Somebody on another forum said that they were using pmks on their diawa SR5.
  
  I only paid 50 quid for a z9 power 4th and you can get pmk topkits for about 70 so cant see the point of using other makes.
Author

Posts