new maver flat xl comp. rollers

This topic has 6 replies, 6 voices, and was last updated 15 years, 4 months ago by TF_foxy.

Viewing 6 reply threads

Author

Posts
- 03/02/2011 at 10:29 am #44461
  TF_wightangler
  Anybody got these and more particuarly are they as long in width as the impressive Milo Brooklyn?
  Have heard favourable comments and leg height seems to be on a par- but interested in width before buying a pair as seem very well priced comparitively.
- 03/02/2011 at 11:02 am #130743
  TF_stevie b
  Thinking about getting one myself.
  
  No it is not as long/wide as the milo.
- 03/02/2011 at 1:05 pm #130754
  TF_bliss
  Participant
  I have the milo roller and its huge!
  Don’t think it needs to be so big but certainly gives you something to aim at…!
- 03/02/2011 at 7:44 pm #130857
  rotherhamrob
  was looking at these in the shop today and have to say i’m very impressed although not as wide as the milo the single roller extends very high and the double one even higher and could extend as high as most v rollers but are ten times more sturdy and won’t tip over in the wind.
- 03/02/2011 at 9:07 pm #130884
  TF_craigm
  I’ve got one but only used it twice so far, I’m very impressed with it. It is plenty wide enough and the height it goes to is on a par with the Maver comp V roller.
  At the price its an absolute bargain IMO.
- 04/02/2011 at 11:56 am #130932
  TF_wightangler
  cheers guys, will deffo be ordering a pair.
- 04/02/2011 at 3:27 pm #130973
  TF_foxy
  have both and the milo is wider but the maver has solved two problems the milo has.
  when shipping back on the milo the vertical rollers ride up, maver have locked these into place with some form of internal bungee.
  secondly the milo can fold inwards on the legs, this can be solved by adding a preston insert each side of the main frame and pushed up against the slide system of the legs, maver have solved the problem by adding pin catches.
  it seems maver have copied the design and made it better.
Author

Posts