ptfe bush daiwa g8 no two section

Home › Forums › Fishing › Coarse And Match Fishing › ptfe bush daiwa g8 no two section

Viewing 15 reply threads
  • Author
    Posts
    • 13/02/2011 at 9:07 pm #44703

      TF_punchcrumb

        What size internal diameter for the no 2 section on a daiwa g8 please anyone?

        thanks in advance

      • 13/02/2011 at 9:16 pm #132129

        TF_sumo

          Same as Airity post 4.2mm mate

        • 13/02/2011 at 9:16 pm #132130

          TF_bign
          Participant

            Gaz Malhams small internal

          • 13/02/2011 at 9:35 pm #132135

            TF_squatt

              Maver Match This no.5 internal used to fit.

            • 13/02/2011 at 9:42 pm #132137

              TF_punchcrumb

                THANKSto all who replied i have ordered some sensas 3.8 mm internals off e pay.

              • 13/02/2011 at 9:44 pm #132140

                TF_sumo

                  Think youll find them to small 4.2mm fits the number 2 section

                • 13/02/2011 at 10:20 pm #132149

                  TF_squatt

                    I’m sure what you’ve ordered are too small.

                  • 13/02/2011 at 11:01 pm #132152

                    TF_GLEBE1

                      The Sensas 3.8mm fits the Airity match no2 section for sure

                    • 14/02/2011 at 11:13 pm #132286

                      dave w
                      Participant

                        just done 6 airity match kits and 4 from my old G8 used maver internal 3.8mm perfect fit mate.

                      • 15/02/2011 at 7:10 am #132292

                        TF_Anthonywaters
                        Participant

                          Ive got 3.8mm in some match kits they do work loose occasionally and sometimes slide down the elastic

                        • 15/02/2011 at 8:08 pm #132417

                          TF_punchcrumb

                            got bushes today top service alas they are a little loose,whats the best way to pad them out for a nice tight fit? anyone?

                            Thanks in advance

                          • 15/02/2011 at 8:29 pm #132422

                            TF_Chris-turner
                            Participant

                              i was told in a shop to use map 3.5 and they fit a dream. did my a treat.

                            • 15/02/2011 at 8:45 pm #132425

                              TF_sumo

                                Get the sensas 4.2 mm ones that is what I use on mine , fit nicely .4mm is not much but makes a nice fit failing that add a spot of superglue

                              • 15/02/2011 at 9:08 pm #132432

                                TF_Chris-turner
                                Participant

                                  i was told not to glue incase u need to remove thm once they get damaged. instead use ptfe tape and wrap tht round untill tight

                                • 15/02/2011 at 9:20 pm #132436

                                  TF_the margin gnome

                                    Push them onto the number one section to fatten them out a bit then they should fit snugly.

                                  • 15/02/2011 at 9:53 pm #132439

                                    TF_gotgaz

                                      put a short bit of number 2 elastic down the side before you push the bush on then trim it off with some sissors works a treat

                                  • Author
                                    Posts
                                  Viewing 15 reply threads

                                  You must be logged in to reply to this topic.