Tourny Pro X mandrel

[TF_kev825]

Does any one know or can confirm if the Tourney Pro X is run off the same mandrel as the original Tourney Pro and or the Airity.
I’m assuming that if its a one off mandrel then future spares may be hard to get and very expensive.

[TF_JohnH]

The pro x and the original t pro are exactly the same, all sections interchange.
As for the arity I do not know.

[TF_freddy the frog]

@JohnH wrote:

The pro x and the original t pro are exactly the same, all sections interchange.
As for the arity I do not know.

yes it’s the same as well.

[TF_maker]

the pro, airity, pro x, spectron power, G8 are all on the same mandrel, not sure about the G20?

[TF_ian_kent]

i can confirm the G20 is on the same mandrel also.

Ian

[TF_the margin gnome]

And indeed the whisker all terrain

[TF_bartezParticipant]

i think you will find that the 5&6 sections are differnt but the rest is off the same mandrel.

[Tommy Boy]

Right…im confused..

i have a G8 that needs a 16m section and has a repaired no 8 section….

if i got a spectron power will i be able to use the good g8 sections as spares on any of the above mentioned poles??

or, if i picked up ny of the poles above i can use the 16m and no 8 sections for the g8??

cheers!!

[TF_bartezParticipant]

the airity,torny pro,x,spec power,g20,g8 are all of the same mandrel the allterrain has the 5&6 sections with a differny taper but all the other sections are the same as above.

[Author]

Posts