Rive Footplate issue…

This topic has 14 replies, 7 voices, and was last updated 14 years, 7 months ago by TF_kev825.

Viewing 14 reply threads

Author

Posts
- 06/10/2011 at 7:44 pm #49020
  TF_Kagger TNB
  After approximately 6 matches worth of hard use (from new), one of the rubber anti-slip strips has fallen off the footplate of my box.
  
  It’s my own fault obviously. I’ve taken it out in the rain, and had river water lap over it. I’ve also taken the liberty of standing on it.
  
  Anyway, if anyone else has had this issue, did you just leave it off? Looks to me like it might be a bit slippy.
  
  If you glued it back on, what did you glue it with? If I was only going to take it out in the sunshine (like most of my mates do with their motorbikes), I’d use superglue, but this sisn’t water resistant…
- 06/10/2011 at 8:23 pm #149551
  TF_wilmy
  Could try superglue. if that fails this stuff is the kiddy not cheap tho???
  Sikaflex 292 or similar
  http://www.marinemegastore.com/product.asp?pf_id=BUR_170112&src=GBASE&gb_exvat=1
- 06/10/2011 at 8:33 pm #149553
  TF_Kagger TNB
  Thanks for that.
  
  Not cheap, but better than falling in like the bloke next to me did on Willow lake (Barford) today.
  
  He asked me if I had any spare clothes, I told him no, but I had a plummet he could use to save going in again.
  
  I don’t think he saw the funny side 😀
- 06/10/2011 at 8:59 pm #149555
  TF_toby b
  Any silicone seal will stick but the sikkaflex is particularly good failing that evo stick or thixofix
- 06/10/2011 at 9:57 pm #149558
  TF_redarmy
  Nick m machines the complete knob out of aluminium does a set of them has sold and supplied loads on here in the past
- 07/10/2011 at 1:13 pm #149587
  TF_kev825
  Karl
  
  try no more nails mate – the instant grab stuff
  
  Kev
- 07/10/2011 at 1:47 pm #149588
  TF_shep2
  not a footplate issue but the paint on the “front spar” started coming off 1st time out 😡
- 07/10/2011 at 2:35 pm #149592
  TF_Kagger TNB
  @redarmy wrote:
  
  Nick m machines the complete knob out of aluminium does a set of them has sold and supplied loads on here in the past
  
  Does anyone know if he’s still doing them?
- 08/10/2011 at 2:03 pm #149633
  TF_kev825
  I hope he is – I sent money via paypal for a set weeks ago – heard nothing though!!!!
- 09/10/2011 at 3:57 pm #149662
  TF_Kagger TNB
  Be intersted to know your thoughts on them Kev.
  
  Changing the subject slightly, it’s a shame you aren’t a bit nearer the coast. I have to spend every 15th week in Belgium. working in Zeebrugge, living in Brugge. We could’ve met up for a beer and a babble.
  
  Have you had a look in any tackle shops over there? How do prices compare?
  
  I know where there is one on the outskirts of Brugge, but haven’t made the effort to have a look in (I’d have to err… slip out of work 🙂 ) .
- 09/10/2011 at 6:59 pm #149670
  TF_kev825
  Karl
  
  I live about an hour – hour and a half from Brugge and the journey isn’t that bad – not had a look at the tackle shops up around that area but the ones around here are more expensive so I do most of my buying online. If the exchange rate was more favorable then I guess it would be cheaper over here as it was several years ago.
  
  I could always take a drive up for a meet and a beer mate – you’ll have to let me know when you’re in town
  
  Kev
- 09/10/2011 at 7:43 pm #149674
  TF_Kagger TNB
  Hi Kev.
  
  I tried to send you a PM, but apparently you, as a user, don’t exist!
  
  I sent it instead as an E-mail.
  
  Let me know if you don’t get it.
  
  Cheers
- 09/10/2011 at 9:47 pm #149683
  TF_Yare Rod
  You could sell the box and buy another one…… Bet Glenn rubs his hands every time you walk in the door………
- 10/10/2011 at 7:39 am #149687
  TF_kev825
  @Kagger TNB wrote:
  
  Hi Kev.
  
  I tried to send you a PM, but apparently you, as a user, don’t exist!
  
  I sent it instead as an E-mail.
  
  Let me know if you don’t get it.
  
  Cheers
  
  I got it lol – reply on it’s way
  
  Kev
- 10/10/2011 at 6:45 pm #148999
  TF_Kagger TNB
  @Yare Rod wrote:
  
  You could sell the box and buy another one…… Bet Glenn rubs his hands every time you walk in the door………
  
  I didn’t get it off Glen. Brought a tear to his eye…
Author

Posts