Pull bungs and clean caps.

Home › Forums › Fishing › Coarse And Match Fishing › Pull bungs and clean caps.

Viewing 2 reply threads
  • Author
    Posts
    • 13/02/2012 at 6:59 pm #50510

      TF_Dry net

        I have modified my clean caps to incorporate a pull bung, a simple procedure is to glue in the clean cap into the male joint the drill it out so there is ample room for the bung- end to slip inside, once drilled you can use a counter sinker to put that little taper on it so you can still ship out at speed. Simples 🙂

      • 13/02/2012 at 7:44 pm #155428

        TF_Smed

          or…….
          you can use these…

          http://www.protectapole.com/index.html

        • 13/02/2012 at 11:26 pm #155445

          TF_iansi01354

            @Smed wrote:

            or…….
            you can use these…

            http://www.protectapole.com/index.html

            100% agree great bit of kit and machined to fit specific poles!

        • Author
          Posts
        Viewing 2 reply threads

        You must be logged in to reply to this topic.