PULLA KITS

Home › Forums › Fishing › Coarse And Match Fishing › PULLA KITS

Viewing 10 reply threads
  • Author
    Posts
    • 05/05/2011 at 10:36 am #46364

      andyp6867
      Participant

        thinking of investing in some of these for my top kits , which is best – the ones with a bung ,or drilled hole in top kit ? . also any ideas where i can get my top kits drilled ? thanks in advance .

      • 05/05/2011 at 10:38 am #139914

        andyp6867
        Participant

          or is it just a case of drilling them yourself ?

        • 05/05/2011 at 11:45 am #139920

          TF_staffie

            Ive just done some side pullas on mine just get a piece of old section about an inch and a half that fits over your top kit and fits snug were you want your side pulla,araldite in place,put maskin tape were you want the hole,drill the hole and araldite an internal bush in place job done and they work perfectly 🙂

          • 05/05/2011 at 12:53 pm #139927

            TF_dirkdiggler

              the preston bungs are just the job,i’ve been using them since they came out with no problem at all and they weigh next to nothing.
              before you go drilling all your topkits just fast forward a year or two to when your selling your pole on ebay or wherever?
              if your pole has a hole in every topkit i and a lot of others would’nt buy it off you ~think

            • 05/05/2011 at 2:27 pm #139945

              TF_staffie

                Even if the top kit has a hole drilled in it you can still go the conventional way and ust a normal pulla the hole wont make any difference to the pole what so ever.As for sellin it im sure people would buy it if the top kits are drilled or not wont make any difference at all.

              • 05/05/2011 at 4:16 pm #139959

                andyp6867
                Participant

                  thanks for that lads , think i will look at the preston ones first then go from there .

                • 05/05/2011 at 8:53 pm #139996

                  Anonymous

                    I used a puller bung for the last time at last weeks Packington Fisho. If I’d caught anything over two pound I might have been able to tell you if they were any good!

                  • 06/05/2011 at 4:42 pm #140048

                    TF_Tarqun

                      I’ve got double puller kits on my pole, I have to say i was a little sceptical about them before I tried it. Bought some second hand top kits for my pole which had already been done and best investment i’ve made. Had more kits changed over since then

                      I got my done by

                    • 06/05/2011 at 4:49 pm #140049

                      snaptackle

                        middy ones are ok and you get two in a £2.99 pack

                      • 06/05/2011 at 7:31 pm #140070

                        andyp6867
                        Participant

                          thanks for that will take a look at the middy ones also .

                        • 07/05/2011 at 7:15 pm #140133

                          snaptackle

                            Another thing I had two puller bungs fitted in the bottom and two pre drilled with hole in the side .
                            I found the puller bungs in the bottom were much smoother to use than pulling elastic through the side .
                            I changed them all to puller bungs in the bottom and am much happier with this set up.

                        • Author
                          Posts
                        Viewing 10 reply threads

                        You must be logged in to reply to this topic.